Mascus Blog News
Number of ads: 67

Used Caterpillar 938 loaders for sale

Filter
ads/page
Page
Create an Email Alert
Caterpillar 938 specs

  • Caterpillar 938M Waste Handler (2016)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrester performance as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    188 hp
    190 hp
    188 hp
    1600 rpm
    173 hp
    175 hp
    168 hp
    169 hp
    171 hp
    648 lb ft
    621 lb ft
    628 lb ft
    621 lb ft
    1800 rpm
    188 hp
    190 hp
    182 hp
    184 hp
    186 hp
    648 lb ft
    628 lb ft
    Power Train
    Fixed
    Oscillating
    7 degrees
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Offset rims available to meet European roading requirements.
    *Differential front locking axle can be engaged on the go at full torque to 20 km/h (12.4 mph) on the 938M.
    Spring applied hydraulically released
    Outboard wet disc
    10.5 degrees
    Locking differential (standard)
    Transmission
    *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Steering
    3500 psi
    3.1 in
    2 in
    15.7 in
    42506 lb ft
    34 gal/min
    31398 lb ft
    3.1 s
    2.3 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Buckets
    3.0-5.0 m3 (3.9-6.5 yd3)
    Operating Specifications
    21720 lb
    Service Refill Capacities
    8.5 gal
    51.5 gal
    23.8 gal
    44.9 gal
    5.3 gal
    2.9 gal
    5 gal
    9.2 gal
    9.2 gal
    Cab
    ISO 3471: 2008
    ISO 3449: 2005 LEVEL II
    *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
    The Blue Angel environmental label is an optional attachment for Europe only.
    68 dB(A)
    101 dB(A)
    Loader Hydraulic System
    31.1 in
    21.9 in
    50 gal/min
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
    4061 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4351 psi
    4061 psi
    4351 psi
    50 gal/min
    5.5/6.2 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.7/10.6 seconds

  • Caterpillar 938M (2014)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    188 hp
    182 hp
    190 hp
    1800 rpm
    188 hp
    188 hp
    190 hp
    182 hp
    184 hp
    186 hp
    648 lb ft
    621 lb ft
    628 lb ft
    1600 rpm
    173 hp
    175 hp
    168 hp
    169 hp
    171 hp
    648 lb ft
    621 lb ft
    628 lb ft
    Power Train
    Fixed
    Oscillating
    Locking differential
    7 degrees
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M.
    Offset rims available to meet European roading requirements.
    Spring applied hydraulically released
    Outboard wet disc
    10.5 degrees
    7 degrees
    Transmission
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Steering
    3500 psi
    3.1 in
    2 in
    15.7 in
    42506 lb ft
    34 gal/min
    31398 lb ft
    3.1 s
    2.3 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Buckets
    2.5-5.0 m3 (3.3-6.5 yd3)
    Operating Specifications
    22107 lb
    Service Refill Capacities
    8.5 gal
    51.5 gal
    23.8 gal
    44.9 gal
    5.3 gal
    2.9 gal
    5 gal
    9.2 gal
    9.2 gal
    Cab
    ISO 3471: 2008
    ISO 3449: 2005 LEVEL II
    Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
    Loader Hydraulic System
    31.1 in
    21.9 in
    50 gal/min
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    4061 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4351 psi
    50 gal/min
    5.5/6.2 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.7/10.6 seconds
    42 gal/min
    4061 psi
    4351 psi
    Air Conditioning System
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

  • Caterpillar 938F

    Dimentions
    Dimensions
    8.5531 ft in
    10.1 ft in
    9.11 ft in
    1.3123 ft in
    Specifications
    Engine
    140 hp
    149 hp
    2200 rpm
    402.7568 cu in
    4.1339 in
    5 in
    Operational
    28726.2309 lb
    55.4761 gal
    23.7755 gal
    12.6803 gal
    7.9252 gal
    6.3401 gal
    7.1326 gal
    12 V
    100 amps
    20.5-2.5 PR(L-2)
    Transmission
    Power Shift
    4
    3
    23.6 mph
    13.7 mph
    Hydraulic System
    24800 Kpa,3600Psi
    43.06 gal/min
    6 sec
    1.4 sec
    2.8 sec
    Bucket
    8.878 ft in
    3.2699 yd3
    2.7336 yd3
    Dimensions
    8.5531 ft in
    10.1 ft in
    1.3123 ft in
    9.11 ft in

  • Caterpillar 938K

    Specifications
    Engine
    6
    2236
    C7.1 ACERT
    169 hp
    175 hp
    402 cu in
    591 lb ft
    1600 rpm
    672
    4 in
    5 in
    170 hp
    169 hp
    169 hp
    170 hp
    Operational
    34129 lb
    51.5 gal
    23.8 gal
    8.5 gal
    2.9 gal
    9.2 gal
    9.2 gal
    20.5
    Transmission
    4
    4
    25 mph
    25 mph
    8 mph
    8 mph
    8 mph
    17 mph
    25 mph
    25 mph
    Steering
    40 degrees
    3.1 in
    3500 psi
    40 degrees
    Weights
    35104 lb
    Tires
    20.5 R25, radial (L-3)
    Buckets
    2.5 m3 - 5.0 m3 3.2 yd3 - 6.5 yd3
    Hydraulic System
    4061
    50 gal/min
    6.2 sec
    1.5 sec
    2.7 sec
    Dimensions
    25.1 ft in
    10 ft in
    49 degrees
    10.9 ft in
    2.16 ft in
    5 ft in
    10 ft in
    9.25 ft in
    3.75 ft in
    54 degrees
    45 degrees
    1.5 ft in
    17.25 ft in
    13 ft in
    6.4 ft in
    3.9 in
    Operating Specifications
    20997 lb
    40 degrees
    3.75 ft in
    9.25 ft in
    Service Refill Capacities
    7.9 gal
    51.5 gal
    5.3 gal
    23.8 gal
    44.9 gal
    2.9 gal
    9.2 gal
    9.2 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Loader Hydraulic System
    50 gal/min
    4061 psi
    5.5 s
    1.5 s
    2.7 s
    9.7 s
    4.7 in
    31.1 in
    5.9 in
    21.9 in
    9.7 sec

  • Caterpillar 938H

    Dimentions
    Bucket
    9.08 ft in
    Dimensions
    24.08 ft in
    8.75 ft in
    11 ft in
    9.83 ft in
    1.25 ft in
    12.58 ft in
    3.5 ft in
    Specifications
    Engine
    6
    2236
    6.6 ACERT
    180 hp
    197 hp
    2200 rpm
    402.8 cu in
    620
    38 %
    4.1 in
    5 in
    180 hp
    172 hp
    172 hp
    180 hp
    Operational
    33190 lb
    65.3 gal
    23.5 gal
    4.6 gal
    9.5 gal
    11.4 gal
    15.1 gal
    14 gal
    25551 lb
    39.42 ft in
    24 V
    80 amps
    24 degrees
    20.5R25
    Transmission
    Powershift
    4
    3
    26.8 mph
    15.8 mph
    5 mph
    5 mph
    9.1 mph
    15.8 mph
    26.8 mph
    Weights
    33190 lb
    Tires
    20.5 R25
    Buckets
    2.3 m3 - 3.0 m3 3.0 yd3 - 4.0 yd3
    Hydraulic System
    Piston
    1000
    77.9 gal/min
    5.4 sec
    1.4 sec
    2.7 sec
    Bucket
    27576 lb
    9.08 ft in
    8.83 ft in
    3.65 yd3
    3.15 yd3
    Dimensions
    24.08 ft in
    8.75 ft in
    11 ft in
    1.25 ft in
    9.83 ft in
    12.58 ft in
    3.5 ft in
    23.58 ft in
    9.8 ft in
    50 degrees
    11 ft in
    9.42 ft in
    3.25 ft in
    65 degrees
    50 degrees
    12.58 ft in
    1.9 in
    Operating Specifications
    22207 lb
    27576 lb
    9.4 ft in
    Service Refill Capacities
    9.5 gal
    65.3 gal
    4.6 gal
    23.5 gal
    11.4 gal
    Cab
    SAE J1040 APR88, ISO 3471:1994
    SAE J1040 APR88, ISO 3471:1994
    Loader Hydraulic System
    5.4 s
    1.4 s
    2.7 s
    9.8 s
    9.5