Mascus Blog News
Number of ads: 27

Used Caterpillar 930 loaders from the United States, Florida

Filter
ads/page
Page
Create an Email Alert
Caterpillar 930 specs

  • Caterpillar 930M Aggregate Handler (2016)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrester performance as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    164 hp
    157 hp
    166 hp
    1800 rpm
    164 hp
    164 hp
    166 hp
    157 hp
    160 hp
    162 hp
    592 lb ft
    566 lb ft
    572 lb ft
    1600 rpm
    160 hp
    162 hp
    154 hp
    156 hp
    158 hp
    592 lb ft
    566 lb ft
    572 lb ft
    Power Train
    Fixed
    Oscillating
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Offset rims available to meet European roading requirements.
    **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Spring applied hydraulically released
    Inboard wet disc
    Locking differential (standard)
    10.5 degrees
    Transmission
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Steering
    3500 psi
    2.8 in
    1.6 in
    17.2 in
    37155 lb ft
    34 gal/min
    27747 lb ft
    2.8 s
    2.4 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Buckets
    2.5-2.7 m3 (3.3-3.5 yd3)
    Operating Specifications
    19563 lb
    Service Refill Capacities
    7.9 gal
    51.5 gal
    23.8 gal
    43.6 gal
    5.3 gal
    2.2 gal
    5 gal
    6.9 gal
    6.6 gal
    Cab
    ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
    * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
    The Blue Angel environmental label is an optional attachment for Europe only.
    Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
    Loader Hydraulic System
    28.7 in
    21.9 in
    50 gal/min
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
    * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    3626 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4061 psi
    3626 psi
    4061 psi
    50 gal/min
    5.1/5.7 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.3/10.1 seconds

  • Caterpillar 930M (2014)

    Specifications
    Engine
    427 cu in
    4 in
    5 in
    Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
    Cat C7.1 ACERT
    * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
    164 hp
    157 hp
    166 hp
    1800 rpm
    164 hp
    164 hp
    166 hp
    157 hp
    160 hp
    162 hp
    592 lb ft
    566 lb ft
    572 lb ft
    1600 rpm
    160 hp
    162 hp
    154 hp
    156 hp
    158 hp
    592 lb ft
    566 lb ft
    572 lb ft
    Power Train
    Fixed
    Oscillating
    Locking differential
    Limited slip differential
    Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Spring applied hydraulically released
    Inboard wet disc
    10.5 degrees
    7 degrees
    Transmission
    * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
    1-13 km/h (0.6-8 mph)
    8 mph
    17 mph
    25 mph
    Steering
    3500 psi
    2.8 in
    1.6 in
    17.2 in
    37155 lb ft
    34 gal/min
    27747 lb ft
    2.8 s
    2.4 s
    Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Buckets
    2.1-5.0 m3 (2.7-6.5 yd3)
    Operating Specifications
    18670 lb
    Service Refill Capacities
    7.9 gal
    51.5 gal
    23.8 gal
    43.6 gal
    5.3 gal
    2.2 gal
    5 gal
    6.9 gal
    6.6 gal
    Cab
    ISO 3471: 2008
    ISO 3449: 2005 LEVEL II
    Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab
    * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
    Loader Hydraulic System
    28.7 in
    21.9 in
    50 gal/min
    * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    3626 psi
    4.7 in
    2.6 in
    5.9 in
    3.5 in
    4061 psi
    50 gal/min
    5.1/5.7 seconds
    1.5/1.7 seconds
    2.7/2.7 seconds
    9.3/10.1 seconds
    42 gal/min
    3626 psi
    4061 psi
    Air Conditioning System
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

  • Caterpillar 930G

    Dimentions
    Dimensions
    25.8432 ft in
    9.5144 ft in
    1.3812 ft in
    Specifications
    Engine
    1
    Caterpillar
    3056E DIT
    150.1945 hp
    160.9226 hp
    2300 rpm
    366.1426 cu in
    80
    3.937 in
    5 in
    Operational
    29039.2873 lb
    59.4387 gal
    33.0215 gal
    10.5669 gal
    9.1139 gal
    6.8685 gal
    6.6043 gal
    17.2474 ft in
    Transmission
    4
    3
    38 mph
    24 mph
    Dimensions
    25.8432 ft in
    1.3812 ft in
    9.5144 ft in

  • Caterpillar 930K

    Specifications
    Engine
    6
    2236
    C7.1 ACERT
    152 hp
    154 hp
    402 cu in
    551 lb ft
    580
    4 in
    5 in
    156 hp
    154 hp
    154 hp
    156 hp
    Operational
    28948 lb
    51.5 gal
    43.6 gal
    8.5 gal
    2.2 gal
    6.9 gal
    6.9 gal
    20.5
    Transmission
    4
    4
    25 mph
    25 mph
    8 mph
    8 mph
    8 mph
    17 mph
    25 mph
    25 mph
    Steering
    40 degrees
    2.8 in
    3500 psi
    40 degrees
    Weights
    30479 lb
    Tires
    20.5 R25, radial (L-3)
    Buckets
    2.1 m3 - 5.0 m3 2.7 yd3 - 6.5 yd3
    Hydraulic System
    3626
    50 gal/min
    5.7 sec
    1.7 sec
    2.7 sec
    Dimensions
    24.66 ft in
    9.8 ft in
    49 degrees
    10.9 ft in
    2.2 ft in
    4.9 ft in
    9.25 ft in
    3.4 ft in
    54 degrees
    45 degrees
    1.5 ft in
    16.8 ft in
    12.8 ft in
    6.5 ft in
    3.8 in
    Operating Specifications
    18444 lb
    40 degrees
    3.4 ft in
    9.25 ft in
    Service Refill Capacities
    7.9 gal
    51.5 gal
    5.3 gal
    23.8 gal
    43.6 gal
    2.2 gal
    6.9 gal
    6.6 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Loader Hydraulic System
    50 gal/min
    3626 psi
    5.1 s
    1.5 s
    2.7 s
    9.3 s
    4.7 in
    28.7 in
    5.9 in
    21.9 in
    9.3 sec

  • Caterpillar 930H

    Dimentions
    Bucket
    9.58 ft in
    Dimensions
    24.75 ft in
    8.5 ft in
    10.75 ft in
    9.51 ft in
    1.35 ft in
    13.33 ft in
    3.5105 ft in
    Specifications
    Engine
    6
    2236
    C6.6
    149 hp
    2300 rpm
    403 cu in
    536
    Operational
    28725 lb
    59.4 gal
    39 gal
    4 gal
    10.6 gal
    9.1 gal
    6.9 gal
    6.6 gal
    18321 lb
    19.5 ft in
    20.5 R25 L3 XHA
    Transmission
    Standard Transmission max travel speed
    4
    3
    23.8 mph
    15 mph
    Hydraulic System
    Impement Pump
    3755
    58 gal/min
    5 sec
    1.7 sec
    2.8 sec
    Bucket
    30263 lb
    9.58 ft in
    8.4 ft in
    2.7467 yd3
    Dimensions
    24.75 ft in
    8.5 ft in
    10.75 ft in
    1.35 ft in
    9.51 ft in
    13.33 ft in
    3.5105 ft in