Avermann 141K-15-50 und GGF 1200 for sale - the Netherlands

ON REQUEST
ON REQUEST
BASIC INFORMATION
CategoryBale
Brand / modelAvermann 141K-15-50 und GGF 1200
Year2007
Hours6,842 h
LocationDE
Country
Mascus ID1F87E45D
PRICING
Price Excluding TaxOn Request
DETAILS
Gross Weight22,046 lbs
Additional InformationTechnical data baler
Manufacturer Avermann
Type 141K-15/50
Year of manufacture 2007
Operating hours 6,842 hours, stand November
Press force main press 50 tons
Specific pressing force 60.6 N/cm²
Dimensions of feed chute 1,400 x 1,000 mm (l x w)
Theor. cycle time 42 seconds
Theoretical throughput capacity 99 m³/hour
Bale dimensions 1,100 x 750 mm (W x H), adjustable length
Drive power 15 kW
Connected load, total 19 kW
Current consumption, total 63 A
Manual tying system, 4-fold vertical, 3-fold horizontal, preferably with "quicklings" (wire loops pre-cut to length).
Throughput rates with a
bulk density of 35 kg/cbm approx. 2 tons/hour
bulk density of 60 kg/cbm approx. 3 tons/hour
Bulk density of 100 kg/cbm approx. 4.5 tons/hour
Bale weights at a bale length of approx. 1.2 m up to 600 kg, depending on the material
Filling volume hydraulic oil tank approx. 450 l
SPS control Siemens SIMATIC S7-200
Transport dimensions press 7,200 x 2,200 x 2,350 mm (l x w x h)
Transport weight press approx. 10 tons

Additional equipment
The press floor is equipped with replaceable, wear-resistant 15 mm thick steel sheet plates made of NAXTRA 70. In the press channel 4 material retainers are installed to optimise the pressing of strongly expanding materials.

Condition of the baler
Press and conveyor belt are still assembled, connected to electricity and ready for operation. The cylinders are tight and show no leaks. Some welding seams have been re-welded at the press channel. The hydraulically operated door at the end of the press channel (counter press plate) opens and closes without any problems. The machine is immediately ready for operation.

Scope of delivery
Baler with slide belt conveyor

Technical data for the conveyor belt
Manufacturer Avermann
Type GGF 1200
Year of construction 2013
Drive power 3 kW
Length of ascending conveyor 7.000 mm
Gooseneck length 1,000 mm
Pitch 32°
Effective width 1.200 mm

Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Documents141K-15-50_yoc2007_en.pdf
141K-15-50_yoc2007_de.pdf

OBM Recycling Machinery B.V.

  • +49 ...SHOW
    Freespee provides Mascus call back feature involving sending SMS. If you don't wish to share your number or receive SMS you can use the form to email seller instead.
    Please tell the seller that you found their machine for sale on Mascus!
Send e-mail

Contact Person

  • JÖRG ANDRESEN

    OBM Recycling Machinery B.V.
    Weltweit
    • +49 ...SHOW
      Freespee provides Mascus call back feature involving sending SMS. If you don't wish to share your number or receive SMS you can use the form to email seller instead.
      Please tell the seller that you found their machine for sale on Mascus!
    • +31 ...SHOW
      Please tell the seller that you found their machine for sale on Mascus!
    • Languages: German, English
    • Haven Zuidzijde 17, 1122AB Scheemda, Netherlands

Company

OBM RECYCLING MACHINERY B.V.
3
YEARS ACTIVE ON MASCUS

Related brands

MakeNumber of ads
Caterpillar34207
Volvo8961
Liebherr8785
Komatsu7088
JCB4321

At Mascus USA you'll find Avermann 141K-15-50 und GGF 1200 industrial balers, as well as other kinds of used machines and equipment among six main categories available at the top of the page. Check it out now. Details - Hours: 6,842 h, Gross Weight: 22,046 lbs