Mascus Blog News
Number of ads: 19

Used loaders Caterpillar 20 for sale

Here is a list of the currently available used loaders construction machines for sale at Mascus.com. Sort ads by price, year, odometer or country.

Filter
ads/page
Page
Create an Email Alert
Caterpillar 20 specs

  • Caterpillar 5511C (2019)

    Dimentions
    Boom
    121 %
    23 ft in
    15652.8196 lb
    Dimensions
    27.7493 ft in
    10.4987 ft in
    11.0827 ft in
    2.5 in
    126 in
    26.5748 ft in
    423 in
    333 in
    11.0833333333333 ft in
    Operating Specifications
    26.6 ft in
    32 ft in
    Track
    30 in
    102 in
    180 in
    8 in
    67000 lb
    Undercarriage
    8.5007 ft in
    24 in
    8 in
    67000.6899 lb
    Specifications
    Engine
    2236
    C9 ACERT
    247 hp
    228 hp
    2100 rpm
    537.0089 cu in
    228 hp
    Cat C9 ACERT
    Operational
    53709.0128 lb
    140.0112 gal
    16.1145 gal
    10.3027 gal
    79.2516 gal
    24 V
    95 amps
    Weights
    53710 lb
    52440 lb
    Hydraulic System
    10.98 cu in
    10.98 cu in
    11.59 cu in
    Service Refill Capacities
    16.1 gal
    140 gal
    69.2 gal
    79.3 gal
    10.3 gal
    2.6 gal
    90 gal
    Dimensions - Track Harvester Configuration
    446 in
    133 in
    126 in

  • Caterpillar 160M/160M AWD (2014)

    Specifications
    Ripper
    26259 lb
    16.8 in
    5
    20540 lb
    39.2 in
    21 in
    Engine
    6
    537 cu in
    4.4 in
    5.9 in
    Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
    Cat C9 ACERT
    Maximum torque (VHP Plus) measured at 1,000 rpm.
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator.
    Power as declared per ISO 14396; Rated Speed = 2,000 rpm; AWD = 201 kW (269 hp)
    No engine derating required up to 3048 m (10,000 ft).
    10000 ft in
    213 hp
    2,000 rpm
    122 degrees
    216 hp
    991 lb ft
    1,650 rpm
    600 rpm
    159-200 kW (213-268 hp)
    159-200 kW (216-272 hp)
    40%
    213 hp
    Frame
    1 ft in
    1 ft in
    0.05 ft in
    61.1 in
    6 in
    22.5 in
    1.6 in
    32 degrees
    3 in
    18 degrees
    6.3 in
    Power Train
    Multiple oil disc
    Multiple oil disc
    Direct drive, power shift, countershaft
    8 Forward/6 Reverse
    Dual circuit control system
    3565 in2
    Weights
    Base operating weight on standard machine configuration is calculated with full fuel tank, coolant, lubricants, operator and 14.0R24 tires with multi-piece (MP) rims.
    45432 lb
    45432 lb
    Hydraulic System
    Variable piston
    Electro-hydraulic load sensing, closed center
    Pump output measured at 2,150 rpm.
    3500 psi
    55.7 gal/min
    450 psi
    Moldboard
    12 ft in
    16.3 in
    3.7 in
    6 in
    0.6 in
    6 in
    0.6 in
    24 in
    0.87 in
    35344 lb
    47515 lb
    12 ft in
    18868 lb
    28998 lb
    Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW).
    Dimensions
    10.8333333333333 ft in
    98 in
    119 in
    13.3 in
    241 in
    344 in
    100 in
    60 in
    23.5 in
    133 in
    399 in
    386 in
    102 in
    128 in
    87 in
    Operating Specifications
    29.5 mph
    23.3 mph
    24.93 ft in
    47.5 degrees
    20 degrees
    29.5 mph
    20.3 mph
    14.7 mph
    10.8 mph
    7 mph
    5 mph
    3.5 mph
    2.5 mph
    23.3 mph
    16 mph
    8.5 mph
    5.5 mph
    3.8 mph
    2 mph
    Standards
    ISO 3450:1996
    ISO 3471:2008, ISO 3449:2005 Level II
    ISO 6394:2008, ISO 6395:2008
    The static operator sound pressure level is 73 dB(A) when ISO 6394:2008 is used to measure the value for an enclosed cab. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
    The dynamic spectator sound pressure level is 107 dB(A) when ISO 6395:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed.
    ISO 5010:2007
    Service Refill
    10.6 gal
    7.9 gal
    16.9 gal
    21.1 gal
    1.8 gal
    0.13 gal
    110 gal
    17.2 gal
    Blade Range
    28.7 in
    27.4 in
    37.4 in
    32.3 in
    40 degrees
    5 degrees
    89.7 in
    82.3 in
    17.8 in
    29.5 in
    90 degrees
    Scarifier
    9
    11
    47.4 in
    18.4 in
    5, 11
    4.6 in
    46.6 in
    11.5 in
    4.6 in
    91 in
    10.5 in
    10.5 in
    Tandems
    22.5 in
    8 in
    1 in
    0.7 in
    2 in
    60 in
    15 degrees
    25 degrees
    Weights - AWD
    10992 lb
    28278 lb
    39270 lb
    16894 lb
    35900 lb
    52794 lb
    45431 lb
    13455 lb
    31976 lb
    Net Power - AWD Off
    213 hp
    218 hp
    223 hp
    228 hp
    233 hp
    238 hp
    243 hp
    248 hp
    213 hp
    218 hp
    223 hp
    Net Power - AWD On
    223 hp
    238 hp
    243 hp
    248 hp
    268 hp
    268 hp
    268 hp
    268 hp
    213 hp
    218 hp
    223 hp
    Net Power - VHP Plus
    213 hp
    218 hp
    223 hp
    228 hp
    233 hp
    238 hp
    243 hp
    248 hp
    213 hp
    218 hp
    223 hp

  • Caterpillar 6060 AC/6060 AC FS (2018)

    Specifications
    Swing System
    4 compact planetary transmissions with axial piston motors
    Triple-race roller bearing with sealed internal gearing
    Wet multiple disc brake, spring loaded/hydraulically released
    All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
    Hydraulic braking of the swing motion by counteracting control
    Closed-loop swing circuit with torque control
    3.8 rpm
    Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
    Undercarriage
    42
    7
    2 plus a skid plate in between
    1 planetary transmission with 2 two-stage axial piston motors
    661160 lb
    Acoustic travel alarm
    Cast double-grouser combined pad links with bushings connected by hardened full floating pins
    All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
    Bottom rollers are connected to the automatic lubrication system
    Fully hydraulic, self-adjusting track tensioning system with piston accumulator
    Automatic hydraulic retarder valve to prevent over-speed on downhill travel
    Wet multiple-disc brake, spring applied/hydraulically released
    47 %
    0.87 mph
    1.24 mph
    Operating Specifications
    1331590.48 lb
    147709.54 lb
    1333795.1 lb
    147709.54 lb
    Operator's Cab
    External sun shields at side and rear windows
    Under roof mounted heating ventilating and air conditioning system
    Windshield with parallel intermittent wiper/washer
    All-round safety glass, armored windshield and sliding side window
    Operator Protective Guard (Top Guard approved according to ISO 10262:1998)
    Fold-away auxiliary seat with safety belt
    Joystick controls integrated in independently adjustable seat consoles
    Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
    Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
    Roller blinds at all windows
    24.93 ft in
    7.22 ft in
    5.25 ft in
    7.05 ft in
    Robust instrument panel including large colored BCS screen with transflective technology
    Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of electric motor, hydraulic system and lubrication system
    Machine access via retractable access stairway, stairway angle approximately 35 degrees, hydraulically operated
    Sliding emergency ladder (kick-down type) with ladder cage
    General
    Face Shovel (heaped 2:1) - 34.0 m (44.5 yd); Backhoe (heaped 1:1) - 34.0 m (44.5 yd)
    Face Shovel - 549 tonnes (605 tons); Backhoe - 548 tonnes (604 tons)
    1800 kW (2,414 hp)
    Operating Weights
    Other track pads available on request.
    4.59 ft in
    1210330 lb
    24.5 N/cm (35.6 psi)
    4.59 ft in
    1208120 lb
    24.5 N/cm (35.6 psi)
    Automatic Lubrication System
    264 gal
    Connected to the main lubrication system are:
    raceways of the swing roller bearing
    two greasing pinions for the internal gearing of the swing ring
    pivot points of attachment, bucket and cylinders
    bottom rollers of undercarriage
    Grease filters (200 m) between service station and container as well as directly behind grease pump
    System failures displayed by Board Control System
    Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
    Hydraulic Oil Cooling
    2 486/2 474 L/min (2 128/2 125 gal/min)
    Fan speed and flow of oil to the coolers are thermostatically controlled
    Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever motor is running
    Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
    Extremely high cooling efficiency to ensure optimum oil temperature
    Hydraulic System with Pump Managing System
    4 variable flow axial piston pumps
    4640 psi
    5365 psi
    5365 psi
    3 reversible swash plate pumps
    2483 gal
    1320 gal
    Electronic power limit control
    Flow on demand from main pumps depending on joystick position
    Automatic regulation of main pumps to zero flow without demand
    Automatic oil flow reduction of main pumps at:
    • Low line voltage to prevent overheating of motor
    • Hydraulic temperature below + 20 degrees C (68 degrees F)
    • Preset maximum hydraulic temperature
    • Preset maximum motor temperature
    Pressure cut-off for main pumps
    Cooling of pump transmission gear oil
    Full-flow high-pressure filters (100 m) for the main pumps, installed directly behind each pump
    High pressure filters (200 m) for the closed swing circuit
    Full-flow filters (10 m) for the complete return circuit
    Pressure filters (40 m and 6 m) for servo circuit
    Pressure filters (40 m) for the feed pumps of the closed swing circuit
    Transmission oil filters (40 m)
    4 925 L/min (4 244 gal/min)
    3 486 L/min (3 128 gal/min)
    Attachments
    Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
    Inspection holes in booms (FS and BH) and stick (FS)
    Guards for shovel cylinders (FS)
    Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
    Catwalks with rails at booms
    Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Booms and sticks are stress-relieved after welding
    Horizontal automatic constant-angle bucket guidance
    Vertical automatic constant-angle bucket guidance
    Automatic roll-back limiter to prevent material spillage
    Kinematic assistance to hydraulic forces
    Constant boom momentum throughout the entire lift arc
    Crowd force assistance
    Special liner material covering main wear areas inside and outside of bucket
    Lip shrouds between teeth
    Wing shrouds on side walls
    Heel shrouds at bottom edges
    Special wear packages for highly abrasive materials on request
    Electric Motor - 6060 AC/6060 AC FS
    Squirrel cage induction motor
    2414 hp
    6.6 kV 10% (other on request)
    185 A (at 6.6 kV)
    50 Hz (60 Hz on request)
    1,500 min-1 (1,800 min-1 at 60 Hz)
    450% of IN (253% of IN Optional)
    2000 m above sea level (6,600 ft above sea level)
    Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
    Power limit control by Pump Managing System
    Retractable Service Station
    Retractable service station installed underneath the engine module and easily accessible from ground.
    Quick couplings for:
    Pump transmission gear oil left/right
    Hydraulic oil tank
    Grease container
    Electric Motor
    2414 hp
    Standard Bucket Capacity
    44.5 yd3
    44.5 yd3

  • Caterpillar 962L (2016)

    Dimentions
    Dimensions - High Lift
    1.2 ft in
    Dimensions - Standard Lift
    1.2 ft in
    Specifications
    Engine
    427 cu in
    252 hp
    Cat C7.1 ACERT
    726 lb ft
    774 lb ft
    195 kW (265 hp)
    Transmission
    4.3 mph
    7.5 mph
    12 mph
    16 mph
    24.5 mph
    Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.
    4.3 mph
    7.5 mph
    16 mph
    Weights
    42159 lb
    Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.4 m3 general purpose bucket with BOCE.
    Buckets
    2.7-4.4 m? (3.5-5.8 yd3)
    Hydraulic System
    9.5 s
    4047 psi
    64.7 gal/min
    Variable Axial Piston
    Operating Specifications
    For a machine configuration as defined under ?Weight.?
    Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    32822 lb
    25794 lb
    27459 lb
    Service Refill Capacities
    14.3 gal
    72.6 gal
    5.3 gal
    33 gal
    11.4 gal
    11.4 gal
    11.4 gal
    Sound
    *Distance of 15 m, moving forward in second gear ratio.
    **For machines in countries that adopt the ?EU Directives.?
    ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
    72 dB(A)
    107 dB(A)
    75 dB(A)*
    69 dB(A)
    104 LWA***
    Bucket Capacities
    2.7-4.4 m? (3.5-5.8 yd3)
    Dimensions - High Lift
    8.83 ft in
    11.19 ft in
    11.33 ft in
    1.2 ft in
    7.17 ft in
    5.5 ft in
    11 ft in
    24.75 ft in
    14.72 ft in
    12.44 ft in
    66 degrees
    54 degrees
    45 degrees
    7 ft in
    All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
    2.5 ft in
    9.33 ft in
    Dimensions - Standard Lift
    8.83 ft in
    11.19 ft in
    11.33 ft in
    1.2 ft in
    7.08 ft in
    5.5 ft in
    11 ft in
    23.39 ft in
    13.72 ft in
    11.89 ft in
    60 degrees
    49 degrees
    40 degrees
    7 ft in
    All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
    2.11 ft in
    9.33 ft in

  • Caterpillar 730 Ejector (2009)

    Specifications
    Engine
    680 cu in
    5.1 in
    5.5 in
    321 hp
    319 hp
    325 hp
    Cat C11 ACERT
    321 hp
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    5 mph
    Dump
    31 lb
    Service Refill Capacities
    18 gal
    94 gal
    11 gal
    9.5 gal
    46.5 gal
    43.3 gal
    4.8 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 1996
    ISO 5010 2007
    Operating Weights
    30821 lb
    13140 lb
    12368 lb
    56328 lb
    1984 lb
    30005 lb
    30005 lb
    61994 lb
    32805 lb
    43144 lb
    42373 lb
    118322 lb
    Sound Levels
    76 dB(A)
    Body Capacities
    22.1 yd3
    17.7 yd3
    Body Plate Thickness
    0.24 in
    0.24 in
    0.35 in
    Ejector Cycle Times
    12 s
    15 s
Construction Equipment | Excavators | Caterpillar Excavators | Backhoe Loaders | Loaders | Cat Wheel Loaders | Generators | Aerial Platforms | Cranes | Attachments | Dump Trucks | Mini Excavators | Heavy Equipment Spare Parts | Dozers | Cat Dozers
Farm Equipment | Tractors | John Deere Tractors | Trailers | Tillage Machines | Combine Harvesters | Hay And Forage Machines | Utility Trailers
Transport | Trucks | International Trucks | Mack Trucks | Ford Trucks | Dump Trucks | Semi Trailers | Trailers | Tow Trucks | Box Trucks | Bucket Trucks | Vans | Dump Trailers | Conventional & Tractor Trucks | Transportation Spare Parts
Material Handling Equipment | Forklifts | Hyster Forklifts | Doosan Forklifts | Stackers | Reach Trucks
Forestry Equipment | Wood Chippers | Harvesters
Grounds Care Equipment | Lawn Mowers | Compact Tractors | John Deere Compact Tractors
Read more Close