Deister 5x12 for sale - the United States

ON REQUEST
ON REQUEST
BASIC INFORMATION
CategoryScreeners
Brand / modelDeister 5x12
Year2019
LocationBillings, Montana
Country
United States
Mascus ID502F8E22
PRICING
Price Excluding TaxOn Request
DETAILS
Serial Number2004850
Additional InformationDescription: Portable 5x12 Deister Extra Heavy Duty scalping screen plant with PolyDeck

Deister Screen:
• Trunnion type spring support mounts on each corner, with baked epoxy coated support springs
• Transverse structural angles welded to flanges bolted to the sideplates at the spring support mounts protected with 3/8" thick AR steel replaceable wear plates
• Snubbers (friction checks) - spring loaded
• 3/8" thick sideplates with 5/8" x 3-1/2" vertical braces, with 3/4" thick steel reinforcing plates bolted to sideplates between bearing housing and sideplates
• 5/8" thick steel-flanged access ports
• Removable back plates
• Screening media support panel configuration
o Perforated plate support panel constructed of 6"-15.3 lb. ship channels welded to 1/2" thick x 6" wide x 12' long plates bolted to the sideplates for easy replacement
• Sideplates above the deck protected by 3/8" thick x 18" high AR steel replaceable wear plates
• Discharge lip protected by 3/8" thick AR steel replaceable wear plates
• Feed box with 3/4" AR steel replaceable wear plate in the bottom, 3/8" AR steel replaceable wear plate on the sides and back

Eccentric Mechanism:
• Two bearing type vibrating mechanism is located below the deck and equipped with 120 mm. spherical roller vibrating screen bearings
• Steel-flanged vibrating mechanism tubes bolted to the sideplates
• Oil fill and drain plugs located on the outside surface of the bearing housings and the oil level gauges located on the outside surface of the sideplate
• Deister "slingermist" oil bath lubrication system, with labyrinth type dust and oil seals requiring approximately 2 gallons of oil in each vibrating mechanism tube acting as the oil reservoir and requiring only oil changes every 500 hours
• Vibrating mechanism tube is protected by a 1/2" thick replaceable steel shield
• Eccentric shaft with external counterweighted flywheels equipped with removable plates for stroke adjustment
• Bronze sleeve between bearing and shaft

Drive:
• Deister heavy duty pivoted motor base, less motor support
• Wideband V-belts
• 3 groove motor sheave
• Flywheel guard and belt guard, less mounting brackets

Parameters:
• Screen Angle: 15 degrees
• Approximate Operating Speed: 780 RPM
• Approximate Stroke Setting: 7/16"-1/2"

Chassis:
• Tandem axle chassis constructed of heavy duty wide flange beam
• Heavy duty spring suspension w/ (4) 11R x 22.5 radial tires
• Brake Package – air brakes, emergency valve and plumbing
• Light Package – brake and directional signals
• Weg 20HP 1800RPM screen motor
• 42” reversible cross conveyor w/ Dodge #3, 7.5 hp, Superior CEMA C impact bed and 3-ply belt
• 42” Under screen conveyor w/ rear discharge, Dodge #4, 40 hp, Superior CEMA C idlers, impact idlers, (2) 5ft impact beds, full length flashing, ¼” bolt in liners and 3-ply belt, and scraper
• 42” Feed conveyor w/ right angle gear reducer, 20 hp, Superior CEMA C idlers, (2) impact idlers, impact bed, full length skirt board and 3-ply belt ¼” top belting
• 3/8 AR overs chute
• 1/4 under screen hopper
• Access ladder
• Qty (2) Crank down leveling jacks for unloading & cribbing
• (4) Lift Only Jacks and 13hp Honda Power Unit
• Chord holder
• Guarding – Appropriate guarding supplied. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector

SWITCHGEAR:

Switchgear - with NEMA 4 enclosure, Square D Nema components, breakers, reversing starter for cross conveyor, individual start/stop buttons with rubber boots, main disconnect, emergency stop, two extra #2 starters for 20 hp off plant motors and 100’ cable lead. Includes panel stand
Express Financing
Get a
Inventory Location: Westate Machinery Company

Westate Machinery

    Send e-mail

    Contact Person

    • JIM RENO

      Westate Machinery
      • United States

    Company

    WESTATE MACHINERY
    8
    YEARS ACTIVE ON MASCUS

    Related brands

    MakeNumber of ads
    Caterpillar34207
    Volvo8961
    Liebherr8785
    Komatsu7088
    JCB4321

    At Mascus USA you'll find Deister 5x12 screeners, as well as other kinds of used machines and equipment among six main categories available at the top of the page. Check it out now. Details - Serial Number: 2004850