|Additional Information||Description: Used Manitex 102WL mounted to 2006 International 7400 chassis|
4-Section 102 ’ (31,1 m) proportional boom
135 ’ (41,2 m) Maximum main boom tip height
Custom boom point adapter for auxiliary hoist operations
22 ’ 4 ” (6,8 m) A-frame link type pedestal outriggers
19 ’ 10 ” (6,1 m) Behind the cab front out-down type outriggers
Single rear stabilizer
2-Speed Planetary Main hoist with grooved drum and negative draft angle
Single speed auxiliary planetary hoist
Load moment indicator with digital display,CAN bus,overload shutdown and internal boom length cable
Radio Anti-two-block system for both Main and Aux hoist lines
Rugged,weatherproof electrical system with circuit status LEDs
Removable boom rest
21 ’ (6,4 m) clear deck space
System pressure gauge
SAE O-ring and O-ring face seal adapters
Manitex UPTime comprehensive support30 Ton (27,3 mton) Capacity
Inverted T-cross section,4-section telescoping type,extended and retracted proportionally by a double- acting hydraulic cylinder and cable-crowd system.Easily replaceable and adjustable te ﬂon-plugged high density nylon slider pads.
Boom Point – Quick-Reeve design features pass-through allowance for wire rope wedge and socket;makes quick work of parts of line con ﬁguration changes with practi- cally no tools.
Wireline Sheave Head – Removable bracket constructed of high-strength low-alloy steel.Equipped with sheaves for wireline support and wireline crane operations. Sheave head supports 1 or 2 part reeving of Main Hoist Line;1 part for Aux Hoist Line.
Boom Elevation – Double-acting hydraulic cylinder. Working range from 9º below horizontal to 80.4º above.
Load Hook – 5-ton (4,5 mton) capacity hook heavy duty swivel,weight and heavy duty safety latch is provided for single line operation.
Main Winch -Two-speed planetary reducer;wet multi-disc internal brake is spring-applied,hydraulically released.
Maximum theoretical bottom-layer line pull 11,500 lbs (5,216 kg).
Auxiliary Winch -Single speed;wet multi-disc internal brake is spring-applied,hydraulically released.
Maximum theoretical line speed 120 fpm (36,6 mpm).
Maximum theoretical bottom-layer line pull 4000 lbs (1814 kg).
Wire Rope (Main)-335 ’ (102,11 m) of 9/16 ” (14,3 mm) diameter rotation resistant type.
Wire Rope (Aux)-270 ’ (82,3 m)of 3/8 ” (9,5 mm) diameter rotation resistant type.
Swing Drive -Externally mounted double reduction planetary driven hydraulic motor. Internal spring-applied, hydraulically released brake.
Rotation Bearing -Heavy duty ball bearing design, external gear.
Rotation -372° non-continuous rotation with mechanical stops to protect internal plumbing. Maximum theoretical swing speed approximately 1.5 rpm.
Front - Behind the cab out-down type intergraded into subframe. Fitted with double-acting hydraulic cylinders, each operate independently for precise leveling.Total outrigger overall spread is 19 ’ 10 ” (6,1 m).
Rear - Pedestal mounted A-Link style outriggers. Fitted with into subframe. Fitted with double-acting hydraulic cylinders,each operate independently for precise leveling.Total outrigger overall spread is 22 ’ 4 ” (6,8 m).
Clamp design,pedestal and subframe are secured to the truck chassis by means of threaded rods and clamp brackets.This system eliminates welding drilling or bolting to the truck frame.
Subframe - Torsionally resistant,rigid 4-plate fabricated design,with integrated forward out and down outriggers. Mounted under crane,full length of truck frame.
Rear Underride Protection -Supplied on all factory mounted cranes.Fabricated structure bolted to the rear of the truck frame.Complies with Bureau Motor Carrier Safety Standard 393.86.
Flatbed -WL series offered with two bed options; 18 ’ (5,5 m) Heavy Duty steel bed and Knapheide brand 18 ’ (5,5 m) Heavy Hauler steel bed with side rails.
Boom Rest -Heavy-duty fabrication,helps secure boom in place during traveling.
All crane functions are controlled by fully proportional hydraulic valves located in the control console.Control console has dual operator platforms with four single-lever crane controls arranged to ANSI B30.5 standards on each side.Each side is also equipped with controls and indicators including Aux winch,outrigger and stabilizer controls,engine start/stop,foot throttle, signal horn,boom angle indicator,bubble levels,load chart,range diagram,beverage container and a system pressure gauge.
Hydraulic System -A 3-section gear pump direct-mounted to power take-off on truck transmission provides 32 gpm (121 lpm) to the hoist,8 gpm (30 lpm) to the swing circuit and 21 gpm (79.5 lpm) to the other crane functions.Use of SAE O-ring and face seal O-ring hydraulic ﬁttings throughout system.
Hydraulic Tank -Bafﬂed,100 gallon capacity reservoir equipped with two 25 micron ﬁlters on return side;shut-off ball valve and strainer on suction side.
Inventory Location: CraneWorks Houston